Dial Comparator & Indicator Stand

Dial Comparator Stand

These dial Gauge Stands and Transfer Stands consists of a very stable, cast iron base and an upright column with a mounting bracket that features fine adjustment. The serrated anvil prevents the work piece from sticking to it. This rugged transfer stand provides a rigid, stable base with complete and constant accuracy. It is an Unique stand for sensitive dial test indicators to accurately transfer height settings from standard gauges and gauge blocks.

This is a very versatile stand. easily adapts to thickness gauges and COMPARATOR work. It is compact and has sturdy cast iron base. The rugged bracket holds Dial Indicator firmly in place. It can also mount DIGIMATIC Indicator and Linear gauges with fine adjustment range of 1mm for zero settings. Optional interchangeable anvils are also available

Clamping stem diameter : 8mm
Maximum working height : 130mm
Fine adjusting range : 1mm
Mass Kg : 8

Dial Comparator Stand - Code No. 1150

This dial gauge stands and Comparator Stand consists of a very stable, cast iron base, with fine adjustment which consists of a strong and rigid parallel spring assembly.

Clamping stem diameter : 8mm
Maximum working height : 200mm
Fine adjusting range : 1mm
Mass Kg : 8

Dial Comparator Stand -Code No. 1160 & 1170

These heavy-duty precision dial gauge stand is provided with rapid fine adjustment movement. The serrated column has a knurled thumb nut which permits rapid up and down movement of indicator bracket assembly that acts as a safety device preventing accidental dropping of the Indicator bracket Assembly. The final indicator setting is made by turning a fine adjusting knob on the indicator bracket.

Clamping stem diameter : 8mm (12mm)*
Maximum working height : 260mm
Fine adjusting range : Entire Stroke
Mass Kg : 14.5

Dial Indicator Stand

The dial Gauge Stand is provided with serrated square anvil. The serrated column has knurled thumb nut which permits rapid up and down movement of the indicator fine adjustment bracket assembly.

Clamping stem diameter : 8mm
Maximum working height : 200mm
Fine adjusting range : 1mm
Mass Kg : 6

Watch Maker's Mini Dial Indicator Stand -Code No. -1060

Jafuji Dial Indicator Stands and Comparator Stands are extremely rugged and universally adjustable to any position. These gauges are well suited to inspection, layout, checking and lineup operations anywhere in the shop. All settings are individually made without disturbing others. Quick height positioning of the indicator as well as adjustment in a horizontal plane is accomplished by a bracket holding the 22 mm horizontal gauge rod. Individual knurled thumb knobs clamps on the base post in any position. The horizontal gauge rod provides length wise adjustment and each movement is having its own clamping knob. The grid type accurately ground anvil prevents work piece from sticking to it.

Clamping stem diameter : 8mm
Maximum working height : 50mm
Fine adjusting range : 50mm
Mass Kg. : 6
Similar to 1070 with Anvil height fine adjustment of 50mm

Watch Maker's Mini Dial Indicator Stand -Code No. :1070

The ideal dial gauge stand for checking small components for rapid inspection settings of small components, anvil is provided with fine adjustment by means of knurled thumb nut from bottom.

Clamping stem diameter : 8 mm
Maximum working height : 50 mm
Fine adjusting range : 50 mm
Mass Kg. : 2.4

Mykrokator Stand - Code No. :1090

Fine adjustment screws at the bottom to adjust the height of the anvil. Shank Dial 8mm or 28mm interchangeable.

Clamping stem diameter : 28 mm/8 mm
Maximum working height : 100mm
Fine adjusting range : 5mm
Mass Kg. : 6

Universal Dial Indicator Stand - Code No. 1440

This extra heavy and rugged Universal Testing Stand with fine adjustment makes quick and accurate measurement possible on surface plate setups. It is most useful for testing spindle run out of machine tools, lathe work etc., where the highest accuracy is required. The indicator can be swivelled in all directions. It can be used in many different ways, e. g. on the surface plate in testing parallel surface of work piece. On machine tools for setting up pieces to be machined, with reference to already existing surface. It can be also be used with Bench Centre.

Clamping stem diameter : 8 mm
Maximum working height :250 mm
Fine adjusting range : 1 mm
Mass Kg : 5

Universal Dial Indicator Stand (Light duty with bottom Vee) - Code No. 1450

This is the most versatile and universal testing stand. It's added feature is provided with "Vee" on bottom surface of the base to facilitate inspection over cylindrical surfaces.

Clamping stem diameter : 8 mm
Maximum working height :240 mm
Fine adjusting range : 1 mm
Mass Kg : 5.25